vertical scale in a digital measurement

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
RGrimm
Newbie
Posts: 0
Joined: Thu Aug 14, 2014 2:55 pm

vertical scale in a digital measurement

Post by RGrimm » Fri Aug 29, 2014 11:43 am

Good afternoon,
I hope, this question wasn't already asked.
How can I change the vertical scale in a digital measurement?
My picoscope SW 6.9.14.16 displays one channel on my 1920x1080 display just 0.5mm heigh...

best regards
Attachments
29-08-2014 13-40-19.jpg
R&D + TS, PICO 3206-MSO owner, from switzerland
Top
Hitesh
Site Admin
Site Admin
Posts: 2846
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: vertical scale in a digital measurement

Post by Hitesh » Wed Sep 03, 2014 8:34 am

Hello RGrimm,

Currently, the ability to adjust the vertical scale for digital lines is not present.

I have submitted a feature request for our Development Team to consider.

Best wishes,
Hitesh

Technical Support Engineer
Top
Post Reply

Return to “PicoScope 6 for Windows”