Test and Measurement Forum

PT104 amperage logging

Having problems ? let us know the details here

PT104 amperage logging

Postby Hoxytronic » Thu Aug 28, 2014 3:15 pm

I'm a newbie, setting up to log exhaust temp in a vehicle. That looks reasonably straightforward as I just use the Pt100 settings which are already in the picolog system.
I also would like to log amperage flowing through our prototype, roughly 10 to 25 amps. We have a DC ammeter installed, so can take the signal from that and also use it to calibrate.
How would I set up the scaling / parameters?
Any suggestions?

Posts: 0
Joined: Thu Aug 28, 2014 3:03 pm

Re: PT104 amperage logging

Postby Martyn » Mon Sep 01, 2014 6:42 pm

Please email support@picotech.com with more details about what you are trying do. This is an unusual use of a PT104 and would require additional circuitry.
Technical Specialist
Site Admin
Site Admin
Posts: 2314
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests