Filter frequency response

Having problems ? let us know the details here
Post Reply
erchanik
Newbie
Posts: 0
Joined: Sun Aug 24, 2014 12:02 pm

Filter frequency response

Post by erchanik »

HI

Recently i have got PicoScope 6404C model and i know that it has AWG max 20mhz

How actually i can measure frequency response of sample filter
Sample Filter
Sample Filter
300px-Bandpass_Filter.svg.png (3 KiB) Viewed 3868 times
?
What and where i must connect?

Thank you

Karunen
Advanced User
Advanced User
Posts: 194
Joined: Thu Nov 21, 2013 9:22 am

Re: Filter frequency response

Post by Karunen »

HI erchanik,

To check the frequency response you could connect the signal generator to channel A and the input of the filter.
Then connect channel B to the to the output of the filter.

You can then look at the signals in spectrum mode and this will show what frequencies exist in the signal.
http://www.picoscope.tv/general/spectrum-mode.html

Please note spectrum mode does not measure phase,
you can measure phase using the phase markers or using a maths channel in scope mode (http://www.picotech.com/support/topic13 ... ilit=phase)

Kind Regards,
Karunen

Technical Specialist
Pico Technology

erchanik
Newbie
Posts: 0
Joined: Sun Aug 24, 2014 12:02 pm

Re: Filter frequency response

Post by erchanik »

Thank you

Post Reply