TCO8

Having problems ? let us know the details here
Post Reply
David Lee
Newbie
Posts: 0
Joined: Wed Jul 30, 2014 8:23 am

TCO8

Post by David Lee » Wed Jul 30, 2014 8:31 am

Hi can you help me please? I have a TCO8 which i use with Type k's to record fluctuations in oven temperature but would also like to use it to record door open / door close events.

I have purchased a couple of single channel boards and have put a couple of magnetic reed switches up to the doors of the oven. Can you please tell me how I need to set up my TCO8 to measure the on / off state of these switches please?

I understand that I will need to select type X but that is as far as i understand.

I am not electrically biased so if you could please use simple language that would be of great benefit thanks.

Martyn
Site Admin
Site Admin
Posts: 3287
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: TCO8

Post by Martyn » Fri Aug 01, 2014 10:55 am

It will depend upon what signals you can get from the switches. I believe this is being discussed on our Helpdesk Ticket system with a colleague.
Martyn
Technical Support Manager

Post Reply