Test and Measurement Forum

ADC16 and USB

Post any questions about our serial port products

ADC16 and USB

Postby B Burton » Wed Jul 16, 2014 5:45 pm

I have been using ADC16 for a number of years. I currently have a problem with the PC to which the ADC16 is connected, (serial port COM1), and I need to connect the ADC16 to a laptop while I sort out the problem. However, the laptop already has a device connected to the serial port, and the only input available is a USB socket. I have a serial to USB cable, but I need to know if the ADC16 can be connected to Picolog via a USB port, or do I need additional software/hardware? (OS XP Prof basic)
B Burton
Newbie
 
Posts: 0
Joined: Sun Nov 06, 2011 5:06 pm

Re: ADC16 and USB

Postby Hitesh » Thu Jul 17, 2014 8:27 am

Hi B Burton,

You can connect the ADC-16 via USB to Serial adaptor.

In the Windows Device Manager, expand the Ports (COM & LPT) entry and look for the USB - Serial adaptor. It should have a COM port number assigned to it.

When you connect to the device in PicoLog, select the required COM port number and click 'OK'.

Hope this helps.
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to Serial Port Products

Who is online

Users browsing this forum: No registered users and 0 guests