Problem with sweep function on 6402D

Post any questions you may have about our current range of oscilloscopes
Post Reply
libussa
Newbie
Posts: 0
Joined: Thu Jul 03, 2014 4:37 pm

Problem with sweep function on 6402D

Post by libussa »

Hello,
I'm trying to use the sweep function to do frequency response measurement using the 6402D. It seems the sweep function is not working.
I reproduced the exact steps showed in this video http://www.picoscope.tv/general/frequen ... ement.html

And all I get is one frequency, as shown here :

Image

Here are more info on version:

PicoScope® 6 - PC Oscilloscope software version: 6.8.11.20
Copyright © 1995-2014, Pico Technology Ltd

Model: PicoScope 6402D
Serial Number: CV312/026
USB Version: 3,0
Calibration Date: jeudi 15 mai 2014
Hardware Version: 1 1
Driver Version: 1.4.0.107
Firmware Version: 1.0.2.0 / 1.1.37.0


Thanks for your help

Hitesh

Re: Problem with sweep function on 6402D

Post by Hitesh »

Hi libussa,

There is an issue that has been identified with the driver which has now been fixed.

Please e-mail support@picotech.com and we will be able to assist you further with resolving the issue.

Thanks,

Post Reply