PicoScope Beta 6.9.5 serial decoding

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
bennog
Active User
Active User
Posts: 33
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

PicoScope Beta 6.9.5 serial decoding

Post by bennog » Tue Jun 24, 2014 2:31 pm

When doing serial decoding with the Beta version of PicoScope
The info in the graphical display is not usable, you have to zoom in till the packet is almost taking up the whole screen before you can see the important info from the waveform.

http://www.ans-net.nl/picotech/byte_zoom1.png

When the zoom factor is reduced a little there is only non important data on the screen

http://www.ans-net.nl/picotech/byte_zoom2.png

In the Production version the data is normal to read.

http://www.ans-net.nl/picotech/bytes_production.png

Regards,
Benno

Karunen
Advanced User
Advanced User
Posts: 194
Joined: Thu Nov 21, 2013 9:22 am

Re: PicoScope Beta 6.9.5 serial decoding

Post by Karunen » Mon Jun 30, 2014 3:38 pm

Hi Benno,

The way serial decoded data is shown has been changed and will be available in a later release.

Kind Regards,
Karunen

Technical Specialist
Pico Technology

Claus
Newbie
Posts: 0
Joined: Fri Jul 18, 2014 7:03 am

Re: PicoScope Beta 6.9.5 serial decoding

Post by Claus » Fri Jul 18, 2014 7:15 am

Hello Picoscope software developers.

This little 'inconvenience' still exists in the latest release 6.9.12. It makes your software unusable for serious serial decoding!

I think it's time for 6.9.13.


Pleeeeeeeease !!!! ;-)


Regards,

Claus

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PicoScope Beta 6.9.5 serial decoding

Post by Hitesh » Mon Jul 21, 2014 2:41 pm

Hello Claus,

I have responded to your E-mail Support ticket in order to discuss this further.

Update: The view currently shows the packet name followed by the data value. I will submit a new Feature Request to our Development Team to provide the option to remove the packet name.

For users who wish to view the full packet data, click Advanced Settings in the Serial Decoding dialog and scroll to the bottom of the Advanced Decoder Settings dialog, and untick the 'Show only values in Graph' option:
Advanced Decoder Settings.PNG
Advanced Decoder Settings dialog
Regards,
Last edited by Hitesh on Mon Jul 21, 2014 3:52 pm, edited 1 time in total.
Reason: Update on request
Hitesh

Technical Support Engineer

bennog
Active User
Active User
Posts: 33
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: PicoScope Beta 6.9.5 serial decoding

Post by bennog » Wed Jul 30, 2014 11:50 am

Will this problem be fixed in the next beat release to come ?

Edit: this problem is fixed in the latest version 6.9.14.16 :D

Regards,
Benno

Post Reply