Test and Measurement Forum

10 V range in ADC212/100

Which product is right for your exact requirements

10 V range in ADC212/100

Postby E.Muthu Kumar » Wed Feb 23, 2005 3:51 am

Hi,
I am using 3 units of adc212/100 for my application. What I have noticed in the 10 V range is when I apply a pulse of faster rise time like 1 micro second in the negative polarity, channel B is not responding properly . Where as for a positive polarity it is responding correctly for the same settings. All the 3 units are behaving in the same manner. I believe that this is a hardware problem. I have sent the waveforms to Pico technical support and awaiting reply. Will you be able to check 10 V range of channel B for Negative polarity for a faster rise time pulse for some other ADC 212/100 unit in your factory and give a feed back? If required I will send the recorded waveforms by e-mail.
Thank you
Best regards
E. Muthu Kumar.
E.Muthu Kumar
User
User
 
Posts: 3
Joined: Thu Jul 29, 2004 11:26 am

Postby Sarah » Wed Feb 23, 2005 11:29 am

Hi

Thank you for your post.

My colleague Seb is currently looking at the file you sent and will be in contact with you via email soon.

Best Regards
Sarah
 


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests