Test and Measurement Forum

jitter on signal from maths channel

Forum for discussing PicoScope version 6 (non-automotive version)

jitter on signal from maths channel

Postby nickk622 » Tue May 20, 2014 10:27 am

Squire wave signals both 1khz and 50% duty cycle, signal high level of 18.12v and signal low of 633mv and a phase shift of 90 degrees with channel2 leading are feed to channel1 and channel2 of a PiccoScope 2204A with windows program version So both channels can be monitored for missing pulses the formular -A+B is added to the maths channel and displays for channel1 and channel2 are turned off. The remaining -A+B signal has a mask applied if the Resolution enhancement for channel1 and channel2 is increased from 8bit the display starts to jitter. What is the reason for this effect and are there any actions that can be taken to prevent the jitter.
Posts: 0
Joined: Thu Aug 26, 2010 9:21 am

Re: jitter on signal from maths channel

Postby Karunen » Thu May 22, 2014 1:39 pm

Hi Nick,

Which version of PicoScope 6 are you using and would you be able to send in a psdata file of this?


Technical Specialist
Pico Technology
Advanced User
Advanced User
Posts: 194
Joined: Thu Nov 21, 2013 9:22 am

Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests