Test and Measurement Forum

Action at end of run

Having problems ? let us know the details here

Action at end of run

Postby _NigelH » Fri May 16, 2014 11:28 am

Hi,
Just getting going with PicoLog connected to an ADC20 and get an error when I select Repeat Immedialey as Action at the end of run.
To try and understand how this works, so created a new file "EndOfRunRepeat.plw" from the PLX Recorder menu; I then set a sampling rate of 500ms and stop after 35 samples. The PLW Recorder runs through the first set and then presents an error ! Unable to write file ! The error is repeated before retruning to the PLW Recorder with Awaiting data filename status. When I next go to create New file the new file dialogue contains a filename of my first name appended with a number.
As this feature will be useful to avoid losing data in long term tests I will be grateful if I can get a fix for this.

Thanks.
Nigel H
_NigelH
Newbie
 
Posts: 0
Joined: Fri May 16, 2014 10:40 am

Re: Action at end of run

Postby Karunen » Mon May 19, 2014 3:15 pm

Hi Nigel,

There are some issues with repeat immediately.

The work around is to collect a couple of hours at a time and then restart after delay (can set delay for 1 second).

You during the delay and restart you will not be collecting any data.

Thanks,
Karunen

Technical Specialist
Pico Technology
Karunen
Zen Master
Zen Master
 
Posts: 194
Joined: Thu Nov 21, 2013 9:22 am


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests