had my new PicoScope a few days now and found my first snag. Nothing serious, its just I keep knocking the probes on my desk when not in use, or they get buried under my clutter !!! Since I just got loaned a 3D printer to do some R&D figured the first job would be somewhere to park my probes when not in use.
Knocked up a quick design and printed them out. In hindsight I should have made more separation between the two supports as the probes lift if the Pico is near the edge of my desk. Next time maybe 75mm carbon fibre tube, than 50mm.
Very happy with how this test print worked out, they are printed in PLA on a Rostock Max, the clips worked great as they just click into the fluting along the edge of the 2000. Keeps things tidy on the desk and stops me knocking them on the floor whilst being clumsy.
Last view, just glued it together with super glue, I tried to print the tubes in two halves as part of the frame but the print failed on 5mm columns at 20mm long so redesigned the model without them and used carbon tube instead.
just shout if you want the STL files.