I am facing a problem with my picoscope 2205. When I set the CC mode for the channel B, it remains working in AC mode.
It's not a probe issue as I have the same behaviour when I invert the probes. It comes from the channel B.
Does anyone have an idea?
here is my configuration:
PicoScope® 6 - version : 220.127.116.11
Model: PicoScope 2205
USB Version : 2,0
Calibration Date: Monday 10th September 2012
Hardware Version: 16
Driver Version: 18.104.22.168
Thank you for your help,