Disable Pico logo on printouts?

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
chrissv
Newbie
Posts: 0
Joined: Thu Apr 03, 2014 3:02 pm

Disable Pico logo on printouts?

Post by chrissv » Thu Apr 03, 2014 3:25 pm

Hello,

I would like to disable the Pico logo on scope printouts. I found where I can add my own company logo, and I don't mind the PicoScope tag line at the bottom, but I really don't want the Pico logo in the upper right.

Thank you - Steven

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Disable Pico logo on printouts?

Post by Hitesh » Wed Apr 09, 2014 9:32 am

Hi Steven,

Currently the software outputs the logo to a print out to show that the waveform has been generated using a Pico Technology product. There are no plans to change this at the present time.

As a workaround, you can use the Edit -> Copy as Image menu item in PicoScope 6 to copy and paste the image into a 3rd party application.

Best wishes,
Hitesh

Technical Support Engineer

Post Reply