Did someone forget to upload 6.8.8 ?

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
mike thomas
Newbie
Posts: 0
Joined: Thu Mar 14, 2013 5:24 pm

Did someone forget to upload 6.8.8 ?

Post by mike thomas »

Trying to download the latest Picoscope software, I make the usual choice of scope (3404A in my case), select PicoScope R6.8.8 for windows, and click 'download R6.8.8'.
This takes me to http://www.picotech.com/softdownloader.html where nothing happens so I click on 'Please click here if your download fails to start.'
I then arrive at http://downloads.picotech.com/winxp/Pic ... r6_8_8.exe which says 'Not Found
The requested URL was not found on this server. '

Following the above steps but choosing R6.6.57 works as expected and that download completes ok.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Did someone forget to upload 6.8.8 ?

Post by Martyn »

You should find that 6.8.8 is available now. There was an issue with the download server.
Martyn
Technical Support Manager

bennog
Advanced User
Advanced User
Posts: 206
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Did someone forget to upload 6.8.8 ?

Post by bennog »

Strange, Saturday I was asked to download 6.8.10.13 , witch is 2 versions newer than the version is available for download at this moment.

PicoScope® 6 - PC Oscilloscope software version: 6.8.10.13
Copyright © 1995-2014, Pico Technology Ltd

Benno

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Did someone forget to upload 6.8.8 ?

Post by Martyn »

6.8.10.13 is the latest version but for some reason is not appearing in the download list. We are working on this at present.

You can download it from http://downloads.picotech.com/winxp/Pic ... 6_8_10.exe
Martyn
Technical Support Manager

mike thomas
Newbie
Posts: 0
Joined: Thu Mar 14, 2013 5:24 pm

Re: Did someone forget to upload 6.8.8 ?

Post by mike thomas »

Thank you both, downloading is now working and I have R6.8.10 .

Post Reply