Test and Measurement Forum

Did someone forget to upload 6.8.8 ?

Forum for discussing PicoScope version 6 (non-automotive version)

Did someone forget to upload 6.8.8 ?

Postby mike thomas » Sun Mar 23, 2014 9:03 pm

Trying to download the latest Picoscope software, I make the usual choice of scope (3404A in my case), select PicoScope R6.8.8 for windows, and click 'download R6.8.8'.
This takes me to http://www.picotech.com/softdownloader.html where nothing happens so I click on 'Please click here if your download fails to start.'
I then arrive at http://downloads.picotech.com/winxp/Pic ... r6_8_8.exe which says 'Not Found
The requested URL was not found on this server. '

Following the above steps but choosing R6.6.57 works as expected and that download completes ok.
mike thomas
Newbie
 
Posts: 0
Joined: Thu Mar 14, 2013 5:24 pm

Re: Did someone forget to upload 6.8.8 ?

Postby Martyn » Mon Mar 24, 2014 10:32 am

You should find that 6.8.8 is available now. There was an issue with the download server.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2348
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Did someone forget to upload 6.8.8 ?

Postby bennog » Mon Mar 24, 2014 12:17 pm

Strange, Saturday I was asked to download 6.8.10.13 , witch is 2 versions newer than the version is available for download at this moment.

PicoScope® 6 - PC Oscilloscope software version: 6.8.10.13
Copyright © 1995-2014, Pico Technology Ltd

Benno
bennog
Guru
Guru
 
Posts: 79
Joined: Mon Nov 26, 2012 9:16 am

Re: Did someone forget to upload 6.8.8 ?

Postby Martyn » Mon Mar 24, 2014 1:02 pm

6.8.10.13 is the latest version but for some reason is not appearing in the download list. We are working on this at present.

You can download it from http://downloads.picotech.com/winxp/PicoScope6_r6_8_10.exe
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2348
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Did someone forget to upload 6.8.8 ?

Postby mike thomas » Mon Mar 24, 2014 3:48 pm

Thank you both, downloading is now working and I have R6.8.10 .
mike thomas
Newbie
 
Posts: 0
Joined: Thu Mar 14, 2013 5:24 pm


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests