ps4000a SDK

Post general discussions on using our drivers to write your own software here
Post Reply
MikeNuke
Newbie
Posts: 0
Joined: Thu Oct 31, 2013 1:49 pm

ps4000a SDK

Post by MikeNuke » Thu Mar 20, 2014 2:01 pm

Hi!
I am going to do changes in the software we use to acquire data with picoscopes in order to add the possibility of using also a 4824 device we are planning to buy.
The oscilloscope page allows to download the programmer guide, and in the installation folder of PicoScope 6 the ps4000A.dll can be found.
I usually find the ps4000awrap.dll in the SDK, but the 4824 is not in the list.
There are other models not in the list but sharing the SDK (5000a can be downloaded selecting the 5242), so is the ps4000a SDK already available and can somehow be download?
If not available, is it known when it will be published?
Thank you!
MikeNuke
Politecnico di Milano
Department of Energy, Nuclear Engineering Division

Hitesh
Site Admin
Site Admin
Posts: 2794
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: ps4000a SDK

Post by Hitesh » Fri Mar 21, 2014 4:18 pm

Hi MikeNuke,

An SDK Build has been requested. There are some changes to be made for some examples relating to other ranges but if you e-mail support@picotech.com stating which programming language you require an example for, we may be able to send out an example or provide guidance on getting started.

Best wishes,
Hitesh

Technical Support Engineer

MikeNuke
Newbie
Posts: 0
Joined: Thu Oct 31, 2013 1:49 pm

Re: ps4000a SDK

Post by MikeNuke » Mon Mar 24, 2014 10:24 am

Ok!
Thank you very much!
MikeNuke
Politecnico di Milano
Department of Energy, Nuclear Engineering Division

Post Reply