Using multiple different pico data loggers ADC16 and 1216

Post any questions you may have about our current range of USB data loggers
Post Reply
Stephen996
Newbie
Posts: 0
Joined: Wed Mar 19, 2014 8:36 am

Using multiple different pico data loggers ADC16 and 1216

Post by Stephen996 »

Hi,

Is it possible to record voltage using both ADC16 and 1216 at one time?
I have a 1216 connected via USB and a PicoADC16 via serial port and want to use all available channels on differential input settings.

thanks,

Stephen

Hitesh

Re: Using multiple different pico data loggers ADC16 and 121

Post by Hitesh »

Hi Stephen,

This should be possible with the PicoLog software assuming that you have ticked the option to install for all devices during the installation process.

You can then tick the 'Use multiple converters' in the Recording dialog and proceed to add both devices through the Converter details dialog.

I hope this helps.

Post Reply