2 display views on demo software

Having problems ? let us know the details here
Post Reply
ithertz
Newbie
Posts: 0
Joined: Sun Feb 09, 2014 3:30 pm

2 display views on demo software

Post by ithertz » Mon Feb 10, 2014 1:12 pm

I am using the current 6.7.37.33. to play around before committing to anything.

If I open a scope view first I get the scope menu
If I then add a spectrum view how do I move the display to permit THD measurement?

If I open a spectrum view first I get the spectrum menu.
If I then add a scope view I get a scope display of solid blue. How is the view to be adjusted to show the waveform?

Martyn
Site Admin
Site Admin
Posts: 3371
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 2 display views on demo software

Post by Martyn » Mon Feb 10, 2014 1:32 pm

Measurements can be added to each view by first clicking in the window and then selecting the Measurements menu option.

It is possible to independently zoom in on either of the view windows to see more detail.
Martyn
Technical Support Manager

ithertz
Newbie
Posts: 0
Joined: Sun Feb 09, 2014 3:30 pm

Re: 2 display views on demo software

Post by ithertz » Tue Feb 11, 2014 10:13 am

Thanks Martyn, zooming the window does seem to be the easiest way to solve my second question although I haven't found a way to stop the display jitter. The trigger doesn't seem to be functional on the scope waveform in spectrum primary mode.

I haven't found the answer to my first question but I read somewhere that it is advisable to enter spectrum mode as the primary view and then add others. So I guess that answers that one too.

Post Reply