Disabling the relay sound and splashscreen

Post your LabVIEW discussions here
Post Reply
taryasree
Newbie
Posts: 0
Joined: Sat Feb 01, 2014 6:47 am

Disabling the relay sound and splashscreen

Post by taryasree »

Hi

I am using picoscope 2204A for data acquisition and I use a VI to process the acquired signals. However, each time I run my VI, a relay click sound is heard and the picoscope splashscreen appears. Is there any method to disable both?

Thanks
Arya

Hitesh

Re: Disabling the relay sound and splashscreen

Post by Hitesh »

Hi Arya,

The relay click is due to the hardware and cannot be disabled.

With regards to the splashscreen suppression, please could you e-mail support@picotech.com in order to discuss this further.

Thanks,

taryasree
Newbie
Posts: 0
Joined: Sat Feb 01, 2014 6:47 am

Re: Disabling the relay sound and splashscreen

Post by taryasree »

I will do the same. Thank you for the reply.

Regards
Arya

Post Reply