Test and Measurement Forum

TC-08 modifications (serial)

Post any questions about our serial port products

TC-08 modifications (serial)

Postby superls » Fri Jan 17, 2014 10:04 am

Hi,
i hope you can help me, I am after some detail about the TC-08 Serial logger particularly either a schemtic diagram of the circuit or at least what the IC numbers are as they have all been ground off.

I have been inside it and noticed a PIC microcontroller, so I am assuming that this does the 'communicating' to the PC via an RS232 converter of some sorts.

what i am trying to do is convert the serial TC-08 to USB, and i was hoping that rather than convert the RS232 to USB, if the PIC is communicating it will be via UART into a RS232 converter or similar so i am wanting to cut the RS232 conversion out all together, and convert the PIC UART to USB using an FTDI type converter.

I hope this makes sense and hopefully someone can help me with the info i require.

Thanks in advance.
superls
Newbie
 
Posts: 0
Joined: Fri Jan 17, 2014 9:50 am

Re: TC-08 modifications (serial)

Postby Martyn » Fri Jan 17, 2014 3:35 pm

This will be answered through the ticket you have submitted on our helpdesk.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to Serial Port Products

Who is online

Users browsing this forum: No registered users and 0 guests