Test and Measurement Forum

trigger diamond on digital signals

Having problems ? let us know the details here

trigger diamond on digital signals

Postby gunnarwinblad » Mon Jan 13, 2014 8:49 pm

Hello
I have a 3206 MSO. When triggering on the digital signals, how can I get the yellow diamond visible to show the trig Point?
Software is the latest 6.8.6
gunnarwinblad
Newbie
 
Posts: 0
Joined: Mon Jan 13, 2014 8:31 pm

Re: trigger diamond on digital signals

Postby Martyn » Tue Jan 14, 2014 11:50 am

At present the trigger diamond is only available for the Analog channels. There is a feature enhancement logged with the developers to add a trigger marker for the digital channels if activated.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: trigger diamond on digital signals

Postby gunnarwinblad » Fri Jan 17, 2014 8:19 am

Hello Martin
I thought it would be possible to place the Diamond on the digital signals because this is shown in the Help-menu. Pls see the attached screen dump or just search for MSO view. This shows the trigger Diamond on the D7 signal.
So this feature has been implemented in some earlier version?

Regards
G
gunnarwinblad
Newbie
 
Posts: 0
Joined: Mon Jan 13, 2014 8:31 pm

Re: trigger diamond on digital signals

Postby Martyn » Fri Jan 17, 2014 2:13 pm

Possibly, I am not sure which version that screen shot was taken from so can't easily check. It doesn't make sense to have it attached to one digital channel, particularly if more are enabled, which is why a trigger line would be be a better option.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: trigger diamond on digital signals

Postby Jeff » Fri Apr 04, 2014 12:42 pm

Martyn is right: I put that screenshot in the manual using an experimental version of the software. I don't think the trigger diamond for logic signals was ever publicly released. I will make a note to update the screenshot. Sorry if it caused you any confusion.
Jeff
User avatar
Jeff
Zen Master
Zen Master
 
Posts: 190
Joined: Tue Apr 05, 2005 12:39 pm
Location: St Neots, UK


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests