3206 MSO Analog Probes

Which product is right for your exact requirements
Post Reply
bob@bobsamuel.com
Newbie
Posts: 0
Joined: Tue Jan 07, 2014 6:36 am

3206 MSO Analog Probes

Post by bob@bobsamuel.com » Tue Jan 07, 2014 6:49 am

Before I purchase a 3206 MSO, which I would like to do ASAP, I would like know its analog inputs can be used to monitor 24 VDC signals.

1. Are the probes supplied with the 3206 MSO the 1x / 10x type?

2. If 10x probes are supplied, what signal accuracy should I expect when using the probes in 10x mode? And, can you lead me to a data sheet description of the 1x / 10x probes?

3. If 10x probes are NOT supplied, how do I monitor the 24 VDC signals?

Thanks, Bob
Top
Martyn
Site Admin
Site Admin
Posts: 3332
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 3206 MSO Analog Probes

Post by Martyn » Tue Jan 07, 2014 8:24 am

The 3206MSO is supplied with two of these x1/x10 probes

http://www.picotech.com/document/pdf/ta131.en-2.pdf

which will allow the monitoring of 24V signals on the analog inputs.
Martyn
Technical Support Manager
Top
Post Reply

Return to “Pre-Sales Advice”