Test and Measurement Forum

Picoscope4424 and Fast transient testing

Post any questions you may have about our current range of oscilloscopes

Picoscope4424 and Fast transient testing

Postby Sharpie » Mon Dec 09, 2013 4:27 pm

Hi Forum,

I find myself in the situation where I have to test a piece of equipment for resilience against fast transients and I was wondering if I could use my Picoscope 4424. I realise I can't just plug my standard probes onto the mains, quite a few things would go pop including, quite probably, me, but what type of probe would I need to plug onto the Picoscope to monitor the pulse, generated by a fast transient and burst generator that I would hire in, on both the mains side and the 12v regulated side?

The pulses could be up to 4.5Kv at a maximum of 1Mhz.

Any help would be greatly appreciated.

Posts: 0
Joined: Mon Oct 14, 2013 12:46 pm

Re: Picoscope4424 and Fast transient testing

Postby Martyn » Tue Dec 10, 2013 1:03 pm

Connecting and testing mains is dangerous, please contact support@picotech.com for advice.
Technical Support Manager
Site Admin
Site Admin
Posts: 3103
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 1 guest