Dual Triggering

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
dreaquil
Newbie
Posts: 0
Joined: Thu Nov 21, 2013 1:23 pm

Dual Triggering

Post by dreaquil » Sun Nov 24, 2013 10:47 pm

I don't know if this makes any sense but is it possible to set two triggers for different channels ( 1 for A and 1 for B) if they are being displayed in different scopes (or not)?

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Dual Triggering

Post by Hitesh » Tue Nov 26, 2013 2:46 pm

Hi dreaquil,

You can only set one trigger at a time on a device. It is possible to trigger on a combination such as A OR B as well as A AND B.

Regards,
Hitesh

Technical Support Engineer

dreaquil
Newbie
Posts: 0
Joined: Thu Nov 21, 2013 1:23 pm

Re: Dual Triggering

Post by dreaquil » Thu Nov 28, 2013 1:57 pm

How would I do that please?

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Dual Triggering

Post by Hitesh » Fri Nov 29, 2013 10:21 am

Hi dreaquil,

Ensuring that the channels that you require are enabled, please click on the Advanced Triggers icon on the toolbar and select the Logic Trigger option:
Logic_Trigger2.png
Logic Trigger dialog
You can configure the parameters for the channels and select the combination. Please ensure that the 'Used' tickbox is selected.

I hope this helps.
Hitesh

Technical Support Engineer

Post Reply