Program fails with "Updating time ... Operation failed"

Post Reply
domuhe
Newbie
Posts: 0
Joined: Thu Nov 21, 2013 2:31 pm

Program fails with "Updating time ... Operation failed"

Post by domuhe » Thu Nov 21, 2013 2:35 pm

Hello,

Enviromon complains at startup about logger not running and suggests to "Program".

Doing this it goes through the motions until "Updating time ....." There it ends with
Operation failed.

What to do now?

Thank you

domuhe

Hitesh
Site Admin
Site Admin
Posts: 2794
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Program fails with "Updating time ... Operation failed"

Post by Hitesh » Tue Nov 26, 2013 2:13 pm

Hi domuhe,

Please ensure that you have the most recent version of the EnviroMon software installed, then follow the logload procedure described in section 3.6.5 (How to update the logger software) in the EnviroMon User's Guide:

http://www.picotech.com/document/pdf/emw.en-10.pdf

I hope this helps.
Hitesh

Technical Support Engineer

Post Reply