Using the AWG and picolog simultaneously
-
- Newbie
- Posts: 0
- Joined: Tue Nov 12, 2013 5:49 pm
Using the AWG and picolog simultaneously
Is it possible to use the AWG integrated in the picoscope software while simultaneously reading data streamed from the picolog software?
Re: Using the AWG and picolog simultaneously
Hi fabianmicallef,
Unfortunately this is not possible as two applications cannot access the device driver and hence the PicoScope at the same time.
Regards,
Unfortunately this is not possible as two applications cannot access the device driver and hence the PicoScope at the same time.
Regards,
Hitesh
Technical Support Engineer
Technical Support Engineer
-
- Newbie
- Posts: 0
- Joined: Tue Nov 12, 2013 5:49 pm
Re: Using the AWG and picolog simultaneously
I understand that this should belong in another board, but having said that, and related to the above: Is it possible to write code with the SDK such that the AWG is used while simultaneously collecting data by fast streaming?
Thank you for your support.
Fabian Micallef
Thank you for your support.
Fabian Micallef