Using the AWG and picolog simultaneously

Forum for discussing PicoScope (version 5)
Post Reply
fabianmicallef
Newbie
Posts: 0
Joined: Tue Nov 12, 2013 5:49 pm

Using the AWG and picolog simultaneously

Post by fabianmicallef » Tue Nov 12, 2013 5:55 pm

Is it possible to use the AWG integrated in the picoscope software while simultaneously reading data streamed from the picolog software?

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Using the AWG and picolog simultaneously

Post by Hitesh » Wed Nov 13, 2013 9:54 am

Hi fabianmicallef,

Unfortunately this is not possible as two applications cannot access the device driver and hence the PicoScope at the same time.

Regards,
Hitesh

Technical Support Engineer

fabianmicallef
Newbie
Posts: 0
Joined: Tue Nov 12, 2013 5:49 pm

Re: Using the AWG and picolog simultaneously

Post by fabianmicallef » Wed Nov 13, 2013 4:58 pm

I understand that this should belong in another board, but having said that, and related to the above: Is it possible to write code with the SDK such that the AWG is used while simultaneously collecting data by fast streaming?
Thank you for your support.
Fabian Micallef

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Using the AWG and picolog simultaneously

Post by Hitesh » Thu Nov 14, 2013 10:18 am

Yes it can :D
Hitesh

Technical Support Engineer

Post Reply