PS 3204 MSO datalogging

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Mon Nov 11, 2013 3:40 pm

PS 3204 MSO datalogging

Post by peppeg85 » Mon Nov 11, 2013 3:45 pm

hi, i read this forum and i've seen that picolog doesn't recognize my oscilloscope.
Is there an alternative way/program to use my 3204 as datalogger?
thanks(and sorry for my english)!!

Posts: 2854
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PS 3204 MSO datalogging

Post by Hitesh » Mon Nov 11, 2013 4:11 pm

Hi peppeg85,

The PicoScope 3204MSO is not supported by PicoLog as it uses a different driver model to the now obsolete PicoScope 3204.

You can either setup PicoScope 6 to capture data over the require time (up to just under 14 hours at 5000s/div) or you can use the Software Development Kit to create your own application from our website

In step 1, select your product and in step 2, select the Software Development Kit option.

We provide examples for C, C#, LabVIEW, Excel VBA and MATLAB. Digital channel acquisition is not currently supported in the MATLAB Instrument Driver.

Hope this helps.

Software Dev. Engineer

Post Reply