TC-08 Kaput

Post any questions you may have about our current range of USB data loggers
Post Reply
blackmoth
Newbie
Posts: 0
Joined: Fri Nov 08, 2013 6:31 am

TC-08 Kaput

Post by blackmoth » Fri Nov 08, 2013 6:36 am

Hi,

I was running some tests this afternoon on the TC-08 and the LED doesn't work anymore. The system WAS running, now it has stopped. NONE of the sensors has any voltage on them, as the measurements are isolated from direct contact with electronics.

Any idea what might be the cause? Plugging in USB cable no longer detects anything. No led light. No response. Why would the unit die suddenly?

Any ideas?

Scott

Martyn
Site Admin
Site Admin
Posts: 3331
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: TC-08 Kaput

Post by Martyn » Fri Nov 08, 2013 10:18 am

Please contact support@picotech.com as it may be a hardware fault that needs investigating
Martyn
Technical Support Manager

Post Reply