change .psdata to .mat

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
iman
Newbie
Posts: 0
Joined: Tue Oct 08, 2013 2:18 pm

change .psdata to .mat

Post by iman » Tue Oct 08, 2013 2:21 pm

Hi.
Can anybody please explain how can I change the format of an already saved data from .psdata to .mat in order to be opened by MATLAB?
Thanks.

Hitesh
Site Admin
Site Admin
Posts: 2827
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: change .psdata to .mat

Post by Hitesh » Wed Oct 09, 2013 9:04 am

Hi Iman,

You can export the data by loading the .psdata file back into PicoScope 6 and then clicking File -> Save As... and changing the save as type to Matlab 4 files (*.mat).

Please note that if your file contains more than 100MS per channel, then the file will not load into MATLAB (this is a limitation of the .mat v4 format). If this is the case please e-mail support@picotech.com attaching the psdata file if it is a small file or with a link to where to download it from.

Thanks,
Hitesh

Technical Support Engineer

Post Reply