Test and Measurement Forum

PicoScope 2206 with 64-bit MATLAB

Post your MATLAB discussions here

Re: PicoScope 2000 MATLAB Instrument Driver - Alpha Release

Postby Hitesh » Mon Sep 16, 2013 9:17 am

HI Sebastien,

Good to hear the device is connecting now.

The driver returns data from the device in ADC Counts - this will result in values between -32512 and 32512 which correspond to the minimum and maximum value for the voltage range selected. The jump between 0 and -256 is most likely an ADC count value.

What signal are you feeding in? Can you provide some example data values or show a plot of the data received?

I hope this helps.
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PicoScope 2206 with 64-bit MATLAB

Postby marcoazpurua » Tue Sep 13, 2016 9:30 am

I am having troubles to run the MATLAB examples using my PS 2206B, 64-bit MATLAB 2014a .

I think I have configured everything properly because I have done this before for my PS5444B. I have copied the drivers, installed the most recent SDK and Picoscope software, etc. I also have tried with the PS2000 and PS2000a drivers. Sometimes even the Picoscope waitbar appears as usual and then it closes.

Copyright (C) Pico Technology Ltd. 2014 - 2015

PicoScope 2000 Series MATLAB Instrument Driver

Number of units found: 0

Serial number(s):

Opening PicoScope 2000 Series device...

Instrument Device Object Using Driver : picotech_ps2000a_generic.mdd

Instrument Information
Type: Oscilloscope
Manufacturer: Pico Technology Ltd.
Model: PicoScope 2000 Series (A API)

Driver Information
DriverType: MATLAB generic
DriverName: picotech_ps2000a_generic.mdd
DriverVersion: 1.0

Communication State
Status: open

Error using icdevice/connect (line 112)
An error occurred while executing the driver connect code.
No unit found, please check connections.
If this error is not an instrument error, use MIDEDIT to inspect the driver.

Error in PS2000A_IC_Generic_Driver_Block (line 8)
connect(ps2000aDeviceObj)


So, I would like you to provide me some guidance for being able of running the examples with my PS2206B.

This is quite urgent.
Marco A. Azpúrua
Grup de Compatibilitat Electromagnètica (GCEM)
DEE Universitat Politècnica de Catalunya
Campus Nord. Edifici C4. Jordi Girona 1-3. 08034 Barcelona Spain
marco.azpurua@upc.edu - www.upc.edu/web/gcem
User avatar
marcoazpurua
Newbie
 
Posts: 0
Joined: Fri Jun 26, 2015 2:10 pm
Location: Barcelona

Re: PicoScope 2206 with 64-bit MATLAB

Postby Hitesh » Tue Sep 13, 2016 4:05 pm

Hi Marco,

I have responded via your e-mail support ticket.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PicoScope 2206 with 64-bit MATLAB

Postby MartinG » Mon Nov 07, 2016 4:05 pm

Hello,

I get the same error message as Marco. Could you please post the solution or eMail me the solution? I am using Matlab 2016b and PicoScope 2206B.

Regrads,
Martin
MartinG
Newbie
 
Posts: 0
Joined: Mon Nov 07, 2016 4:01 pm

Re: PicoScope 2206 with 64-bit MATLAB

Postby Hitesh » Tue Nov 08, 2016 10:04 am

Hi Martin,

I will e-mail you via our e-mail support system.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PicoScope 2206 with 64-bit MATLAB

Postby niek.moonen » Wed Dec 07, 2016 3:19 pm

Hello,

I get the same error message as Marco. Could you please post the solution or mail me the solution? I am using Matlab 2016b and PicoScope 2208B.

Regrads,
Niek
niek.moonen
Newbie
 
Posts: 0
Joined: Wed Dec 07, 2016 3:18 pm

Re: PicoScope 2206 with 64-bit MATLAB

Postby Hitesh » Wed Dec 07, 2016 3:25 pm

Hi Niek,

Please could you e-mail support@picotech.com and we can provide you with an updated Beta package.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Previous

Return to MATLAB

Who is online

Users browsing this forum: No registered users and 0 guests