Test and Measurement Forum

Driver for ADC20/24

Post general discussions on using our drivers to write your own software here

Driver for ADC20/24

Postby col805 » Fri Sep 20, 2013 3:29 am

I am using aN ADC20/24 unit and want to communicate with Test Point software but am not sure how to. I have previously used the TC-08 and it worked fine but I am not having much luck with the ADC20/24.
I have seen in the past where you have given examples of using the Test Point "code" function for talking with the adc1016.dll file. Do you have a similar example of talking to the HRDL.dll or (PicoHRDL.dll)

Posts: 0
Joined: Fri Sep 20, 2013 3:07 am

Re: Driver for ADC20/24

Postby Hitesh » Tue Sep 24, 2013 10:49 am

Hi Col,

The only information we have regarding Test Point is on our website:


You will need to refer to the Programmer's Guide for the device and ensure the data types are matched correctly.

Best wishes,

Technical Support Engineer
Site Admin
Site Admin
Posts: 2744
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 1 guest