Test and Measurement Forum

Unable to open picoscope 2205 in labview

Post your LabVIEW discussions here

Unable to open picoscope 2205 in labview

Postby engel » Wed Sep 18, 2013 8:22 am

Hello,

I have picoscope 2205 and I cannot open the scope with Labview 8.6 (PicoScope2000aOpen.vi).
When I tried to open it with labview I get error 3 (unable to find scope). The pc software 6 works fine.
I have tried the same dll as the pc software (ps2000a.dll).

Kind regards,
Daniel :D
engel
Newbie
 
Posts: 0
Joined: Wed Sep 18, 2013 8:15 am

Re: Unable to open picoscope 2205 in labview

Postby Hitesh » Wed Sep 18, 2013 9:03 am

Hi Daniel,

It looks as though you have tried to use the LabVIEW examples for the PicoScope 2205 MSO, 2206/7/8 which use a different driver to the PicoScope 2205.

On your installation CD, please look for the SDK which should begin with 'PS2000sdk_r'. Alternatively, please download it from http://www.picotech.com/software.html, selecting the PicoScope 2205 in Step 1.

Best wishes,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Unable to open picoscope 2205 in labview

Postby engel » Wed Sep 18, 2013 10:47 am

Thanks,
The picoscope now works with labview!

best regards,
Daniel
engel
Newbie
 
Posts: 0
Joined: Wed Sep 18, 2013 8:15 am


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests