Help bis with labview and pico t08 usb

Post your LabVIEW discussions here
Post Reply
Noe
Newbie
Posts: 0
Joined: Wed Sep 04, 2013 10:02 am

Help bis with labview and pico t08 usb

Post by Noe » Thu Sep 05, 2013 3:51 pm

Hi again, I really need your help because I'm getting crazy!
So, I have an example for t08 usb that i guess I can use as my programme. the problem is that labview doesn't recognize the pico device (that works because with its software it goes).
It is evidently that I missed something....

Please may I have any suggestions???

Martyn
Site Admin
Site Admin
Posts: 3330
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Help bis with labview and pico t08 usb

Post by Martyn » Thu Sep 05, 2013 8:43 pm

Is Picolog still running and connected to the TC-08 ? If yes close it down before starting the LabVIEW example.
Martyn
Technical Support Manager

Post Reply