Oscilloscope on PCMCIA card for portable PC

Which product is right for your exact requirements
Post Reply
Marco.Fontanesi

Oscilloscope on PCMCIA card for portable PC

Post by Marco.Fontanesi » Fri Dec 17, 2004 1:35 pm

Hello,
My target is to have an oscilloscope on my notebook,
by a PCMCIA card.
I must read signals on vehicles, tipical max 12 Vdc, with high sample rate,
because I must also see on video the bits of Can Bus.
Theese bits are 5 microseconds.
Have you a product (PCMCIA + SW) for this job ?
thanks
Regards
marco.fontanesi@metasystem.it

Sarah

Post by Sarah » Mon Dec 20, 2004 9:49 am

Hi

Thank you for your post.

Unfortunately none of our oscilloscopes are PCMCIA units. They are all connected either by the Parallel port or the USB port of the computer.

Our scope that we recommend for automotive work is the ADC-212/3, this connects via the parallel port.

Hope this helps

Best Regards

Post Reply