plw32.exe has stopped working, maximum calculated parameter?

Post any questions you may have about our current range of USB data loggers
Post Reply
want2know
Newbie
Posts: 0
Joined: Tue Jul 30, 2013 2:54 pm

plw32.exe has stopped working, maximum calculated parameter?

Post by want2know » Fri Aug 16, 2013 8:13 am

Dear Sir/Madam,

I am using Picolog data logging for ADC-20 and terminal board.

While setting up the new data logging, I am using three channels with 5 calculated parameters, whenever I input for "Calculated parameter" for the fourth parameter, I will get this error dialog box "plw32.exe has stopped working" and the picolog software has to be closed.

Is there a limit for the maximum number of calculated parameters i can have? It works perfectly for three calculated parameters though.

Hope to hear you soon, thank you very much.

Hitesh
Site Admin
Site Admin
Posts: 2827
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: plw32.exe has stopped working, maximum calculated parame

Post by Hitesh » Tue Aug 20, 2013 3:16 pm

Hi,

I've tested this with PicoLog 5.22.9 with some simple equations (e.g. A + B) and it appears to be fine.

Please update your software if you have an earlier version and if possible send a data or settings file. You can save to a settings file via the 'Save As' dialog.

Thanks,
Hitesh

Technical Support Engineer

Post Reply