Useful clip for thermocouple (TC-08 Logger)

Post any questions you may have about our current range of USB data loggers
Post Reply
ThomasB
Newbie
Posts: 0
Joined: Fri Aug 02, 2013 1:28 pm

Useful clip for thermocouple (TC-08 Logger)

Post by ThomasB » Fri Aug 02, 2013 1:38 pm

Hello,

I'm using a TC-08 Logger in combination with a couple of thermocouples (SE000, SE027 & SE028). Because I have to do a lot of measurements (with the same measurement fault) I'm looking for a 'clip' that can help me with my measurements. In this way, the way of measurering will always be the same. Is there some kind of standard clip for this job or do I have to custom make one?

SE000:
Image

Some sort of clip I'm looking for:
Image

Kind regards,
Thomas B

Martyn
Site Admin
Site Admin
Posts: 3331
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Useful clip for thermocouple (TC-08 Logger)

Post by Martyn » Wed Aug 07, 2013 8:55 am

We don't have anything. Just make sure that the tip of the thermocouples do not touch any metallic surfaces which may cause erroneous readings.
Martyn
Technical Support Manager

Post Reply