Emw32.exe on com15 and up encounters a problem and closes.

Post Reply
Ivyck
Newbie
Posts: 0
Joined: Wed Jul 10, 2013 2:38 am

Emw32.exe on com15 and up encounters a problem and closes.

Post by Ivyck »

Hi,

The Enviromon software opens successfully but when I configure the data logger into the PC and I try to find the right serial port from the drop down list, an error message pops up when I reach com15 and up saying, "emw32.exe has encountered a problem and needs to close.

Please help asap. Thank you

Regards,
Ivyck

Martyn
Site Admin
Site Admin
Posts: 4483
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Emw32.exe on com15 and up encounters a problem and close

Post by Martyn »

Can you use device manager and try changing the COM port number allocated by windows so that it is below COM 9.
Martyn
Technical Support Manager

Ivyck
Newbie
Posts: 0
Joined: Wed Jul 10, 2013 2:38 am

Re: Emw32.exe on com15 and up encounters a problem and close

Post by Ivyck »

Hi Martyn,

How do I do that?

Thank you

Martyn
Site Admin
Site Admin
Posts: 4483
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Emw32.exe on com15 and up encounters a problem and close

Post by Martyn »

I take it you have a USB to serial port converter.

Open up windows device manager ControlPanel->System->DeviceManager and open up the section Ports (COM & LPT). Find the COM port you are using and rightclick it, select Properties->PortSettings->Advanced and then change the COM port number.
Martyn
Technical Support Manager

Ivyck
Newbie
Posts: 0
Joined: Wed Jul 10, 2013 2:38 am

Re: Emw32.exe on com15 and up encounters a problem and close

Post by Ivyck »

Thank you

Post Reply