ADC-100 using Picoscope displays small noisy square wave.

Ken Howell · Post by **Ken Howell** » Sat Jan 18, 2003 8:56 am

ADC-100 using Picoscope displays small noisy square wave.

I'm trying to use an old ADC-100 on modern PCs but the displayed signal seems to be clipped below 50mV.

I noticed from an earlier posting that this is likely to be due to a missing parallel-port adaptor. The adaptor here seems to have been lost.

Is it possible to get a replacement adaptor, or (better still) what is the configuration of the adaptor? ... I assume it to be just a matter of some cross-overs within the 25-way "D" type connector.

matthew · Post by **matthew** » Tue Jan 21, 2003 2:53 pm

Ken,

Email me your full address and contact details to tech@picotech.com and I will get an adapter send out to you.

Best Regards,