Test and Measurement Forum

ADC-100 using Picoscope displays small noisy square wave.

Post any questions about our parallel port products

ADC-100 using Picoscope displays small noisy square wave.

Postby Ken Howell » Sat Jan 18, 2003 8:56 am

ADC-100 using Picoscope displays small noisy square wave.

I'm trying to use an old ADC-100 on modern PCs but the displayed signal seems to be clipped below 50mV.

I noticed from an earlier posting that this is likely to be due to a missing parallel-port adaptor. The adaptor here seems to have been lost.

Is it possible to get a replacement adaptor, or (better still) what is the configuration of the adaptor? ... I assume it to be just a matter of some cross-overs within the 25-way "D" type connector.
Ken Howell
 

Postby matthew » Tue Jan 21, 2003 2:53 pm

Ken,

Email me your full address and contact details to tech@picotech.com and I will get an adapter send out to you.

Best Regards,
Matt Everett

Pico Software Engineer
User avatar
matthew
Guru
Guru
 
Posts: 109
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK


Return to Parallel Port Products

Who is online

Users browsing this forum: No registered users and 0 guests