Test and Measurement Forum

Saving view and measurement

Post any questions you may have about our current range of oscilloscopes

Saving view and measurement

Postby Glubbein » Tue Jun 04, 2013 6:23 am


I would like to save both measurements and view (as the result you can have when you print a view with measurements), is it possible?

I can save the view but not with the attached measurements.




PS : the 4262 is realy a very good device, a pleasure to work with :D
Posts: 0
Joined: Mon Jul 02, 2012 2:14 pm

Re: Saving view and measurement

Postby Hitesh » Tue Jun 04, 2013 4:08 pm

Hi Glubbein,

At the present moment it is not possible to save measurements with the view as some, if not all are calculated on continuous data being collected.

A request has been made previously to enable the saving of measurement data.


Technical Support Engineer
Site Admin
Site Admin
Posts: 2749
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests