Continuous update of AWG buffer

Post any questions you may have about our current range of oscilloscopes
Post Reply
iainking
Newbie
Posts: 0
Joined: Wed May 29, 2013 9:23 am

Continuous update of AWG buffer

Post by iainking » Wed May 29, 2013 9:28 am

Is there any way I can update the AWG's buffer continuously from software, in order to generate a waveform more than 8k samples long (assuming I'm using 2206 scope)? I'm guessing not, but thought I would check.

Thanks

Martyn
Site Admin
Site Admin
Posts: 3225
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Continuous update of AWG buffer

Post by Martyn » Wed May 29, 2013 10:03 am

You can reload the waveform buffer but you would have to stop and start the scope to output the new signal which would cause gaps in the output signal.
Martyn
Technical Support Manager

iainking
Newbie
Posts: 0
Joined: Wed May 29, 2013 9:23 am

Re: Continuous update of AWG buffer

Post by iainking » Wed May 29, 2013 10:37 am

Thanks Martyn, I thought it would be something like that.

Post Reply