Test and Measurement Forum

ADC212 PROBLEMS

Come here to introduce yourself, who you are, and what you do

ADC212 PROBLEMS

Postby john3377 » Thu May 16, 2013 9:18 am

Hi,
I've a ADC 212, I've been using it for sometime on my old PC (Dell). I've just bought a HP pc with windows 8 (64bit) and i'm having problems installing the SW. I pick the latest SW, but all i get is a scope with a test pattern going across the screen. The ADC212 unit has no affect on the signal, etc.
It looks like the pc does not recognized the 212 unit when i plug it into the usb port.
I've tried doing this a number of times, but still the same.

Any ideas or help would be appreciated.

John
john3377
Newbie
 
Posts: 0
Joined: Mon May 13, 2013 8:40 am

Re: ADC212 PROBLEMS

Postby Hitesh » Fri May 17, 2013 10:25 am

Hi John,

The ADC-212 (along with our other parallel port products) is incompatible with 64-bit operating systems.

You will need a 32-bit operating system to run the device.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to Introductions

Who is online

Users browsing this forum: No registered users and 1 guest