Test and Measurement Forum

Transfer Time for parallel Port / USB

Forum for discussing PicoScope (version 5)

Transfer Time for parallel Port / USB

Postby josc » Wed Nov 24, 2004 5:38 pm

Hello,

we need an Oscilloscope funktion in an automated environment, therefore no display is needed. One Key attribute is speed.

My Question: How long does it take to transfer one shoot to PC?

Thanks in Advance.

cu Jochen.
josc
User
User
 
Posts: 2
Joined: Wed Nov 24, 2004 5:24 pm

Postby Sarah » Thu Nov 25, 2004 3:27 pm

Hi

Thank you for your post.

Which unit are you interested in? The transfer time depends on the unit, if you can tell me which one you are interested in then I can provide you with more information.

Best Regards
Sarah
 

Transfer Time for parallel Port / USB

Postby josc » Thu Dec 16, 2004 11:31 am

Hi,

we need to measure a signal with 7MHz compared to a 2nd Signal for trigger and Start for Time Measure. Any Device which meets this Spec while measuring and transmitting very Quick could be used.

Thanks
josc
User
User
 
Posts: 2
Joined: Wed Nov 24, 2004 5:24 pm

Postby Sarah » Fri Dec 17, 2004 10:44 am

Hi

Thank you for your post.

The quickest scopes we have are our PS3000 series. As these are USB interfaced devices they are much quicker than the parallel ones.

For a signal of 7MHz you would be able to use the PS3204 as this has a spectrum bandwidth of 25MHz.

The download time of the PS3000 series depend on the computer setup. If you use USB2 and have an Intel chipset then you could achieve a download of 4MB/s.

Hope this helps

Best Regards
Sarah
 


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests