Test and Measurement Forum

How to Read PSDATA file format in LabVIEW?

Post your LabVIEW discussions here

How to Read PSDATA file format in LabVIEW?

Postby Karthik » Wed May 08, 2013 12:46 pm

Hi,..

I am using PicoScope 3200 – Oscilloscope for Measurment.I will save my waveform in .psdata file format.Now i need to read
this .psdata file through NI LabVIEW 2009.How to read this?.can any one help me..
Karthik
Newbie
 
Posts: 0
Joined: Wed May 08, 2013 12:15 pm

Re: How to Read PSDATA file format in LabVIEW?

Postby Hitesh » Wed May 08, 2013 12:58 pm

Hi Karthik,

It would be better to export the data to a text file and then read the data into LabVIEW. If you can process a binary file, then you can export to a MATLAB file from PicoScope 6.

The psdata file format is proprietary and can only be read by PicoScope 6.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2518
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: How to Read PSDATA file format in LabVIEW?

Postby Paul Torek » Thu Jul 21, 2016 11:28 am

To read .mat files in Labview, use the Matlab data plugin http://www.ni.com/example/29178/en/ . After installing that into Labview, use the Storage/Data Plugin sub-palette in Labview's file reading palette. You will want to open the file, then Read Data [channel] with "A" for the Name of the channel. Etcetera for other channels. Then close the file.

Attached is an image of my Labview block diagram. Hope this helps.
Attachments
matlab__read__exampled.png
(6.66 KiB) Not downloaded yet
Paul Torek
Newbie
 
Posts: 0
Joined: Wed Jul 20, 2016 7:55 pm


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 1 guest