Can I use Current Clamp (BNC) with Picoscope 2205 MSO

Post any questions you may have about our current range of oscilloscopes
Post Reply
khanhtanvn88
Newbie
Posts: 0
Joined: Thu Mar 21, 2013 2:03 pm

Can I use Current Clamp (BNC) with Picoscope 2205 MSO

Post by khanhtanvn88 »

I have the PC Base oscilloscope 2205MSO. Now, I need to measure the scope of current in Automobile Electric system. Can I buy the Current Clamp PP264: 60 A AC/DC Current Clamp (BNC) and connect it to my oscilloscope 2205MSO.
Thank you for the help!

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Can I use Current Clamp (BNC) with Picoscope 2205 MSO

Post by Martyn »

Yes that clamp will work with the MSO.

Please note that for automotive applications the 8 bit vertical resolution of the 2205MSO will not give the clarity of detail of the 12 bit automotive scopes that we supply. You will be able to see the signal but may lose some of the detail in the noise.
Martyn
Technical Support Manager

khanhtanvn88
Newbie
Posts: 0
Joined: Thu Mar 21, 2013 2:03 pm

Re: Can I use Current Clamp (BNC) with Picoscope 2205 MSO

Post by khanhtanvn88 »

Ok! Thank you so much for your reply.

Post Reply