3224

Post any questions you may have about our current range of oscilloscopes
Post Reply
kayrod
Newbie
Posts: 0
Joined: Mon May 06, 2013 3:52 am

3224

Post by kayrod »

My 3224 has developed a difference between channel A and Channel B, with all settings the same. Even with no probes connected. Channel A is picking up all sorts of noise inc 50Hz. Channel B has a clean flat signal until a signal is applied. The noise on Channel A appears on any applied signal.
I believe this 3224 has become faulty. Where can I send it for repair, re-calibration. :?
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 3224

Post by Martyn »

Please contact support@picotech.com they will advise what needs to be done
Martyn
Technical Support Manager
Top
Post Reply

Return to “USB PC Oscilloscopes”