PicoScope 7 Software
Available on Windows, Mac and Linux
accuracy of ruler values
accuracy of ruler values
When using the ruler in large data sets the ruler values are not accurate. See below picture
Both ruler values display the same time value while half a screen away from each other.
When documenting the signal it would be nice say look at -261,02 sec ore even with better precision.
Is there a way to make the ruler more in line with the screen layout at the moment.
Regards,
Benno
Both ruler values display the same time value while half a screen away from each other.
When documenting the signal it would be nice say look at -261,02 sec ore even with better precision.
Is there a way to make the ruler more in line with the screen layout at the moment.
Regards,
Benno
Re: accuracy of ruler values
Can you check this with the Beta version of the software http://labs.picotech.com/ which will shortly be upgraded to a formal release candidate. I believe it addresses these points although I don't have your data file to be able to confirm it.
Martyn
Technical Support Manager
Technical Support Manager
Re: accuracy of ruler values
The picture was made with the last beta 6.7.19.2
Sample data file (63MB) http://www.ans-net.nl/picotech/ruler%20sample.psdata
Regards,
Benno
Sample data file (63MB) http://www.ans-net.nl/picotech/ruler%20sample.psdata
Regards,
Benno
Re: accuracy of ruler values
OK I can see that now.
If you are in and around the trigger point then the values do show to a number of significant digits but as you come further away the values are too big to display in the text boxes, and as such are need to show position relative to the trigger point, the delta value will be scaled appropriately.
If you are in and around the trigger point then the values do show to a number of significant digits but as you come further away the values are too big to display in the text boxes, and as such are need to show position relative to the trigger point, the delta value will be scaled appropriately.
Martyn
Technical Support Manager
Technical Support Manager