Test and Measurement Forum

ADC-40 and ADC10 are the same?

Post general discussions on using our drivers to write your own software here

ADC-40 and ADC10 are the same?

Postby Manusia » Fri Jan 17, 2003 9:43 am

Hello,

I have ADC-40 but don't know how to write my own program.

I have already downloaded and installed the examples and drivers given on this site, but suddenly found that all the files are not for ADC-40 but for ADC-10. :roll:

When I tried to re-download and re-install (to make sure that I downloaded and installed the correct file), I found that the same problem occurred.

Has anyone ever faced this same problem? Or maybe the technique to write own program for ADC-10 and ADC-40 is the same?

Could someone please help me. I really need help from an advance or expert. :oops:
Manusia
 

ADC-10,12,40,42 differences

Postby matthew » Fri Jan 17, 2003 10:55 am

Greetings Manusia,

The code for the ADC-10,12,40,42 is all exactly the same except for the scaling you want to apply (do this in software once you have collected your readings) and the following routine:

Code: Select all
adc10_open_unit (short port, short product);

Where product is either 10, 12, 40 or 42 (in your case it would be 40).

All of the routines are detailed in the help file in the start menu (if you haven't already found them).

Hope this helps to get you started.

Best Regards,
Matt Everett

Pico Software Engineer
User avatar
matthew
Guru
Guru
 
Posts: 109
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK

Postby Guest » Thu Jan 23, 2003 3:33 pm

Thanks for your answer..

I will try..:)
Guest
 


Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 1 guest