Auto volts

Post general discussions on using our drivers to write your own software here
Post Reply
Mech
User
User
Posts: 4
Joined: Thu Mar 20, 2008 10:57 pm

Auto volts

Post by Mech » Sun Mar 24, 2013 3:22 pm

Hello, Is it possible to apply the auto volts facility with custom ranges?

Regards.

Martyn
Site Admin
Site Admin
Posts: 3331
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Auto volts

Post by Martyn » Mon Mar 25, 2013 3:52 pm

The auto setting for voltage levels will be based upon the actual hardware ranges for the scope rather than the ranges specified in a custom probe.
Martyn
Technical Support Manager

Mech
User
User
Posts: 4
Joined: Thu Mar 20, 2008 10:57 pm

Re: Auto volts

Post by Mech » Tue Mar 26, 2013 8:18 pm

OK, Thanks for that.

Regards.

Post Reply